- 22" wide Any length you need
- Ships today Order by 2 PM ET, Mon to Fri
- Auto-nest Packs your sheet for you
- Every file Checked by a person
Start here
One sheet. As many designs as you can fit.
A gang sheet is one long roll of transfer film, 22 inches wide, with your designs printed side by side. You cut them apart and press them one at a time.
- Pay for the sheet, not for each design on it
- Mix logos, names, numbers and full-front prints on the same sheet
- Auto-nest packs everything in with the smallest gaps it can
- One order, one shipping label, one file check
Sheet sizes
Pick a length. The longer it runs, the less each print costs.
Every sheet is 22 inches wide. Auto-nest packs your designs in with the smallest gaps it can, so these counts are close to what you will really get.
22" × 2 ft 24"
$15.99
Fits about 28 prints at 4" × 4"
$0.57 each3.0¢ per sq in
Good for a first run
22" × 5 ft 60"
$34.99
Fits about 70 prints at 4" × 4"
$0.49 each2.6¢ per sq in
The everyday size
22" × 10 ft 120"
$54.99
Fits about 140 prints at 4" × 4"
$0.39 each2.0¢ per sq in
For a full drop
- Lowest per print
22" × 20 ft 240"
$89.99
Fits about 280 prints at 4" × 4"
$0.32 each1.7¢ per sq in
Production runs
Counts are an estimate for one print size, and mixed designs nest differently. We also stock 3, 7, 8, 12, 15 and 17 foot sheets, all priced the same way.
Start buildingThe same 40 prints, two ways.
Nothing about the print changes. The only difference is how it gets to you.
40 prints, 4 by 4 inches, on dark shirts
Ordered one at a time
$119.20
$2.98 each
Auto-nested on one 22" × 3 ft sheet
$22.99
$0.57 each · 1 sheet
You keep $96.21, about 80% of the bill
Based on the prices above. Your own total depends on the size of your designs and how tightly you nest them.
Build my sheetEmpty film is money you already paid for.
The difference between a good sheet and a wasteful one is usually five minutes of dragging.
Squeeze more out of it
- Run auto-nest last, after every design is on the sheet
- Drop pocket logos and neck tags into the leftover strips
- Repeat your best seller rather than leaving film empty
- Keep artwork at 300 DPI at the size it will print
- Use transparent PNGs so nothing prints a white box
What costs people money
- Blowing up a small file to fill space, which prints soft
- Adding designs after auto-nest and leaving gaps behind
- Leaving a foot of empty film at the end of the sheet
- Ordering several short sheets instead of one long one
Not sure whether your file is big enough for the size you want? Run it through our free design checker first.
In the builder
Laid out in about three minutes.
It runs in your browser, with nothing to install and no design skills needed. Auto-nest does the tetris for you.
- 1 Pick your sheet length Start short if you are testing us. You can always order a longer one next time.
- 2 Drop your designs in Upload as many files as you like, then set the real printed size for each one.
- 3 Hit auto-nest One tap and the builder packs everything in with the smallest gaps it can. Then drop extra logos into whatever space is left.
- 4 Order and press We check the file, print it, and ship it the same day when you order by 2 PM ET.
Stuck halfway through? Send us the files and we will lay the sheet out for you.
Two ways to send us a sheet.
Same film, same ink, same price. The only difference is who lays the sheet out.
You are here
Build it online
For anyone without design software
- Upload your designs and drag them onto the sheet
- Auto-nest packs them in with the smallest gaps it can
- Set the printed size of each design as you go
- Nothing to install, and no design skills needed
Upload your own sheet
For shops that already nest their own files
- Send a print-ready 22 inch file from your own software
- Keep the layout exactly as you set it
- Fastest route if you reprint the same sheet often
- We still check it before anything prints
Not sure which suits you? Start with the builder. You can always switch once you have a layout you reuse.
Before you build one.
Do I have to cut the designs apart myself?
Yes, on a standard sheet. Scissors or a rotary cutter are all you need, and the spacing in the builder leaves room to cut cleanly.
How much space should I leave between designs?
You do not have to work it out. Auto-nest keeps a safe cutting gap between designs while packing them as tightly as it can.
Can I mix different designs on one sheet?
Yes. Different designs, different sizes, different customers' orders, all on the same sheet. That is the whole point.
What files should I upload?
PNG with a transparent background works best, at 300 DPI at the size it will print. Anything with a white box behind it will print that box.
Can I upload my own layout?
How long does it take?
Order by 2 PM ET Monday to Friday and your sheet ships the same day.
Can I reorder the same sheet later?
Yes. Reordering the same layout is the fastest way to restock a design that sells.
How does the sheet arrive?
Rolled, not folded, so nothing arrives creased. Unroll it, cut your designs apart, and store the rest flat.
Fill a sheet, drop your cost per print.
Start with a short sheet if you are still deciding. No minimum, no setup fee, and it ships today.
Ships from the U.S. Order by 2 PM ET for same-day dispatch.